4mm 100% Virgin Fireproof Rigid Core Vinyl Plank Flooring Unilin Click SPC Flooring

4mm Best New 100% Virgin Fireproof Rigid Core Vinyl Plank Flooring Unilin Click SPC Flooring

What Constitutes the Layers of SPC Flooring?

SPC Flooring are not only manufactured from the highest grade materials but also resemble real

natural patterns as closely and as realistically as possible.

The product is created in layers as follows from the bottom up:

• UV layer:This UV coating is the top layer of Spc flooring to make it anti scratch ,resistand to different damage and and anti fading to the sunlight near window of any other indoor enviroment
• Wear layer: This transparent layer is at the top. It provides resistance to scratches and stains and is easy to keep clean.
• Vinyl layer: This layer provides the decoration for the plank. Colors and patterns are printed onto the vinyl.
• SPC layer: This is the dense, waterproof core for the plank made of natural limestone powder, polyvinyl chloride, and stabilizers. It provides rigidity and stability for the plank.
• Under layer: This layer is generally made from IXPE or EVA foam, which provides sound insulation and cushioning.

Key Benifits 

• Excellent Water Proofing
• High Temperature Proofing
• Low shrinkage and expansion rate
• High Rigidity
• Click Locking Technology click strength
• Impact Resistance
• Fire Resistance
• Superb residual indentation performance
• Quick Installation
• No acclimation hours

Specification

Product Picture

Normal Installation

1. Keep the floor without unevenness and curves.

2. Repair unevenness or cracks on the floor repairing products.

3. For perfect construction, you should get rid of dust, oil, and foreign substance.

4. For the wooden floor, check if all wooden board is fixed on the floor.

5. At least 24 to 48 hours, the products have to be kept in the place that construction will be made to make the temperature even.

6. The products have to be only used for the floor.

7. In the humid concrete floor, keep constant temperature over 15℃ for 48 hours to get rid of moisture before construction the floor has to be kept dry.

8. Adhesion power can be weakening of construction is made in low temperature(Lower than 15℃)